Summers Disk-Chisel - Manual (Page 14)

2-2
SECTION 2 – ASSEMBLY INTRODUCTION
GENERAL SAFETY PRACTICES
YOU ARE RESPONSIBLE
for the safe assembly of the
machine.
DO NOT ALLOW CHILDREN
or other unauthorized persons
within the assembly area.
W E A R P E R S O N A L
PROTECTIVE EQUIPMENT
which includes a hard hat,
eye protection, work gloves
and steel toed boots with slip
resistant soles.
DO NOT MODIFY the equip-
ment or substitute parts in any
way. Unauthorized modifi cation
may impair the function and/or
safety of the machine.
U S E S U I TA B L E L I F T I N G
DEVICE for components which
could cause personal injury.
BLOCK UP ANY RAISED PART
of the machine. Be sure machine
is stable after blocking.
ALWAYS INSPECT LIFTING
CHAINS AND SLINGS for
damage or wear.
BE SURE LIFTING DEVICE
IS RATED TO HANDLE THE
WEIGHT.
STOP ENGINE, place all con-
trols in neutral, set parking
brakes, remove ignition key and
wait for all moving parts to stop
before servicing or adjusting.
BE SURE PRESSURE IS
RELIEVED from hydraulic
circuits before servicing or
disconnecting from tractor.
USE EXTREME CARE when
assembling, servicing and
adjusting.