Summers Disk-Chisel - Manual (Page 3)

INTRODUCTION
This manual provides the following information about your Summers Coulter-Chisel.
SECTION CONTENTS
Section 1 – SAFETY explains important safety precautions and familiarizes the Operator with the
decals and their locations.
Section 2 – ASSEMBLY includes step by step assembly instructions.
Section 3 – COULTER-CHISEL OPERATION provides necessary information for the operation and
adjustment of the machine.
Section 4 – MAINTENANCE covers recommended mechanical maintenance.
Section 5 – TROUBLESHOOTING provides a quick reference to solving problems. SPECIFICATIONS
lists important dimensions, capacities and other technical information.
Section 6 – PARTS
OTHER ITEMS OF IMPORTANCE
A. Summers Mfg. Co., Inc. strongly recommends that each Coulter-Chisel Operator READ and UN-
DERSTAND the Operator’s Manual before using the machine. In addition, this Operator’s Manual
should be REVIEWED at least ANNUALLY thereafter.
B. It is the policy of this company in improve its products whenever possible and practical to do so.
We reserve the right to make changes or improvements in the design or construction of parts at
any time without incurring obligations to install such changes on products previously delivered.
C. Reference to “right” and “left” in this manual is determined when machine is viewed from the
rear.
D. Parts are referenced in each drawing with the Summers Manufacturing Part Number. Use this Part
Number when ordering replacement parts from your Summers dealer. See back section of manual
for description of each Part Number.
OWNER REGISTER
Name ____________________________________ Size _________________________________________
Address _________________________________ Serial Number _______________________________
City _____________________________________
State/Prov. ______________________________ Date Purchased ______________________________
Mail Code ________________________________ Dealer _______________________________________
(located by the hitch piece)
i