Electrix Tweaker - Manual (Page 16)

3. Hardware Controls
16
encoder value.
Default Settings
The LED Rings are mapped to CC79-84 on MIDI Channel 1.
Encoder Local Control
By default, the LED rings are locally controlled by the encoders. Locally controlled encoders can
update the LED rings when:
8 User turns the encoder, or
8 TWEAKER receives a MIDI message (also known as a feedback message) that matches the
mapping of the encoder.
3.4.2 Display Modes
The LED rings have four modes to accurately display the current state of any function. The display
mode of each LED ring can be set using the TWEAKER EDITOR, by using the “Set LED Display Mode”
SysEx, or by basic Note / CC Messages, using the LED rings feature of the Settings Channel.
Walk
Walk mode lights 1 LED at a time and seemingly walks up as encoder’s value increases. This mode
has 14 states, so the visual resolution of each state is about 9 MIDI values.
Fill
Fill mode lights all preceding LED’s as encoder’s value increases. This Mode has 14 States, so the
visual resolution of each state is about 9 MIDI values.