Electrix Tweaker - Manual (Page 5)

1. Getting Started
5
1.2 What’s Included in the Box?
The TWEAKER box contains the following items:
8 The TWEAKER Controller
8 A set of four height-extension legs
8 A USB cable
8 A Quick Start poster
8 An installation CD including: Traktor 2 LE, TWEAKER EDITOR software,
and the Ableton Live Remote Script
8 An overlay for the included Traktor 2 LE software
8 An overlay for the included Ableton Live Remote Script
1.3 Product Registration
Why not take a few minutes to register your new product? Registration enables us to keep a record
of your product in case you ever need assistance or warranty coverage. It also enables us to keep
you up to date on any software or firmware updates, availability of new mappings or overlays, etc.
In some cases, additional content may also be available for registered users.
To register your product, visit www.electrixpro.com and click on the Register/Login link at the right
corner of the site.
1.4 Height Extension Legs
A set of four legs is included to extend the height of the TWEAKER to match traditional DJ gear. With
the legs installed, TWEAKER is the same height as most DJ turntables. The legs screw directly into
the bottom surface of the TWEAKER using the provided screw-holes.
1.5 Overlay Installation
To place an overlay on the TWEAKER, simply remove the three fader knobs and place the overlay
on the face plate, making sure that it is tightly fitted in the corners and around all the controls.