38 14 : disable encoder local control, 126 : request controller configuration – Electrix Tweaker User Manual
Page 38
6. SysEx Messages
38
14 : Disable Encoder Local Control
This message can enable or disable Ring Local Control for the encoders.
Total Bytes:
8
Data Bytes:
1
1st Data Byte Received:
Local Control Disabled?
0 = Enabled
1+ = Disabled
Message for Default Settings (Enabled):
< 240, 0, 1, 106, 01, 14, 0, 247 >
15 : Disable Potentiometer Center Note Messages
This message can enable or disable the Note On and Off messages that are sent by the potentiometer
when the control enters and leaves the center detent.
Total Bytes:
8
Data Bytes:
1
1st Data Byte
Received:
Local Control Disabled?
0 = Enabled
1+ = Disabled
Message for Default Settings (Enabled):
< 240, 0, 1, 106, 01, 15, 0, 247 >
126 : Request Controller Configuration
This Message asks the TWEAKER to send a return message detailing all of its settings.
Total Bytes:
8
Data Bytes:
0
Message to Request Settings:
< 240, 0, 1, 106, 01, 126, 247 >