Electrix Tweaker - Manual (Page 9)

3. Hardware Controls
9
3 Hardware Controls
Any of the controls on the TWEAKER can be configured to provide a wide range of functionality.
Here are some basic terms and uses for the controls.
3.1 Buttons
The TWEAKER has 7 encoder push buttons and 43 custom-designed, soft-touch rubber buttons.
All button parameters can be controlled using the TWEAKER EDITOR software. The specific MIDI
messages that the TWEAKER recognizes are also detailed below.
Most music programs are designed to use momentary buttons. For this reason, the TWEAKER’s
buttons are momentary: they send a Note On message when pressed, and a Note Off message
when released. This is similar to the way piano keys operate.