Town One to Six chamber Ranges - Manual (Page 9)

9
10. Align the backsplashes. It may necessary to
level the range so the backsplashes meet at top.
Insert and slide down the "U" shaped joiner un-
til it is level with the top of the backsplash. See
figures 7 & 8 above.
11. Install the three stainless steel tubes of the wok
cover rack. Note there are male and female
ends that mate to become a continuous length.
12. Install the serving shelf. There are bolts left,
right, and center. The range position may have
to be adjusted to allow the bolts to properly
align into the tapped holes provided for them.
13. Pitch the range using the adjustable bullet feet
so that water flows off the top of the range.
figure 7
figure 8
8. Locate the bolt holes in the range body as
shown above in figures 4 & 5 and bolt the
range bodies together.
figure 4
figure 5
9. Silicon the front seam of range decks in the
circled area of figure 6 above.
figure 6
(718) 388-5650 (800) 221-5032 except NY fax: (718) 388-5860 townfood.com