Aalborg PWE Digital - Manual (Page 83)

WARRANTY
Aalborg
7 Flow Systems are warranted against parts and workmanship for
a period of one year from the date of purchase. Calibrations are warranted
for up to six months after date of purchase, provided calibration seals have
not been tampered with. It is assumed that equipment selected by the cus-
tomer is constructed of materials compatible with gases used. Proper
selection is the responsibility of the customer. It is understood that gases
under pressure present inherent hazards to the user and to equipment, and
it is deemed the responsibility of the customer that only operators with
basic knowledge of the equipment and its limitations are permitted to con-
trol and operate the equipment covered by this warranty. Anything to the
contrary will automatically void the liability of Aalborg
7 and the provisions
of this warranty. Defective products will be repaired or replaced solely at
the discretion of Aalborg
7 at no charge. Shipping charges are borne by the
customer. This warranty is void if the equipment is damaged by accident
or misuse, or has been repaired or modified by anyone other than Aalborg
7
or factory authorized service facility. This warranty defines the obligation of
Aalborg
7 and no other warranties expressed or implied are recognized.
TRADEMARKS
Aalborg7 is a registered trademark of Aalborg Instruments.
Buna7 is a registered trademark of DuPont Dow Elastometers.
Kalrez7 is a registered trademark of DuPont Dow Elastomers.
VCR7 is a registered trademark of Swaglok Marketing Co.
Viton7 is a registered trademark of Dupont Dow Elastometers L.L.C.
APPENDIX IV
ƽ CAUTION:
This product is not intended to be used in life support applications!
78