Chatsworth Products Hot Aisle Containment - Manual (Page 34)

Aisle Containment Manual, Rev. 2.0 ___ June 2013
Chatsworth Products 34
INSTALLING COLD AISLE CEILING END PANEL ADJUSTABLE HEIGHT AND WIDTH:
If shorter cabinets are included in a row, adjustable filler panels may be installed to seal the top
of the cabinet to the roof structure.
1. Install left and right supports to elevation beam at required spacing using M8X20 screws
and nut plates.
2. Add rubber seal to vertical flanges on panels and horizontal edge on elevation beam
between support brackets.
3. Assemble panels at required width using 2 M6X12 screws.
4. Install adjustable panel assembly between support brackets and secure using M6X25
screws.
FINISHING THE INSTALLATION:
1. Ensure all fasteners are tightened.
2. Check for remaining air gaps and fill using sealing tape as required.
3. Contact CPI Technical Support if unable to resolve significant gaps.