Avocent Cyclades PM IPDU - Manual (Page 24)

14 Cyclades PM IPDU Installer/Administrator/User Guide
After a successful login, the PM IPDU command prompt appears after which you may use any of
the commands described in this chapter.
Commands
NOTE: When a range of outlets is used in a command and the range spans more than one PM IPDU in a daisy
chain, the range of outlets must not be specified by name. The range of outlets may only be specified by number
in this situation.
adduser
The adduser command adds one username to the internal database. A maximum of eight characters
(not case sensitive) is allowed, and a maximum of eight individual users is allowed. This command
is available to the admin user only.
Syntax
adduser <user>
Arguments
<user> username
Examples
To add a user, enter:
pm>adduser popper
alarm
The alarm command sets and reads the current threshold. This command is available to the admin
user only.
Syntax
alarm | [<IPDU#>|<IPDU_ID>] | <threshold>
In the case of a PM42 IPDU:
alarm | <IPDU#> | <threshold> | <phase_letter>