Avocent Cyclades PM IPDU - Manual (Page 38)

28 Cyclades PM IPDU Installer/Administrator/User Guide
on
The on command turns an outlet or a group of outlets on. If more than one outlet is selected there
will be an interval between outlets being powered on. The interval is defined by the interval
command. This command works on outlets in a PM IPDU daisy chain.
Syntax
on all|<outlet_string>
Arguments
Examples
To turn on outlets 1, 3, 4 and 5, type:
passwd
The passwd command sets a password. Regular users may change or set their own password only.
The Administrator may change his or her own password or any regular user’s password.
Syntax
passwd <user_name>
Arguments
Examples
To change the password for user alpha, when logged in as admin, enter:
Passwords may be set to null, which indicates that no password is needed.
reboot
The reboot command reboots a PM IPDU. You may reboot a specific unit by issuing the reboot
command followed by the unit’s logical number or the unit’s ID. Issuing the reboot command
all Turns off all outlets in the PM IPDU or PM IPDU daisy chain
<outlet_string> Outlet number, such as “5”, outlet name such as “sunfire”, or group of
outlets such as “1, 3-5”
pm>on 1, 3-5
<user_name> Name of the user whose password is being changed
no argument To change the current user’s password
pm>passwd alpha