Avocent Cyclades PM IPDU - Manual (Page 42)

32 Cyclades PM IPDU Installer/Administrator/User Guide
To get the temperature for specific unit, provide the unit number as an argument, enter
the following.
To reset the maximum temperature registered and use reset as an argument, enter:
unassign
The unassign command removes the assignment of an outlet or group of outlets from a given user.
This command is available to the admin user only.
Syntax
unassign <outlet_string> <user>
Arguments
Examples
To unassign outlet 2 and 4 from user diderot, enter:
unlock
The unlock command unlocks an outlet or group of outlets in the current state. The response to this
command is a list of status lines, one per power port.
Syntax
unlock all|<outlet_string>
pm>temperature 2
pm>temperature reset
<outlet_string> Outlet number, such as “5”, outlet name such as “sunfire”, or group
of outlets such as “1, 3-5”
<user> Desired username
pm>unassign 2,4 diderot