Avocent Cyclades PM IPDU - Manual (Page 40)

30 Cyclades PM IPDU Installer/Administrator/User Guide
If you save your configuration to Flash it will be restored after the next reboot. If you do not save
your configuration to Flash, you will lose it all after the next reboot.
Syntax
save
Arguments
none
Examples
To save the configuration to Flash, enter:
status
The status command displays the status of selected outlets.
Syntax
status all|<outlet_string>
Arguments
Examples
To display the status of outlet 1, enter:
To display the status of all outlets, enter:
syslog
The syslog command displays or changes the syslog notification status. This command is available
to the admin user only.
Syntax
syslog on|off|status
pm>save
<outlet_string> Outlet number, such as “5”, outlet name such as “sunfire”, or group of
outlets such as “1, 3-5”
all Displays the status of all outlets in a PM IPDU or PM IPDU daisy chain
pm>status 1
pm>status all