Avocent Cyclades PM IPDU - Manual (Page 36)

26 Cyclades PM IPDU Installer/Administrator/User Guide
NOTE: The PM42 IPDU will not accept entries with decimal places.
list
For the admin user, the list command lists all users that have been created and the outlets assigned
to each of those users. For regular users, the list command lists only the outlets assigned to the user
currently logged in.
Syntax
list
Arguments
none
Examples
As admin, to list usernames and associated outlets in the internal database, enter:
lock
The lock command locks an outlet or group of outlets in their current state. The response to this
command is a list of status lines, one per power port. This command works on all PM IPDUs in a
daisy chain.
Syntax
lock all|<outlet_string>
Arguments
<outlet_string> Outlet number, such as “5”, outlet name such as “sunfire”, or group of
outlets such as “1, 3-5”
Examples
To lock outlets 1, 2 and 6, enter:
name
The name command names an outlet. A maximum of 16 alphabetic and numeric characters (not
case sensitive) is allowed with these exceptions:
• The hyphen (-), percent (%), and comma (,) characters are not allowed.
• Numeric characters are not allowed as the first character of a name.
pm>list
pm>lock 1,2,6