Samsung SC-D382-XAA - Manual (Page 79)

中文 _ 75 75_ English
File number setting works only in M.Cam mode.
➥ page 18
File numbers are given to images in the order they
were recorded when they are stored on the memory
card.
File numbers may be set as follows:
- "Series": When there are existing files, the
new image will be named as the next
number in the sequence.
- "Reset": When there are no files stored on the
memory card, the file numbering starts
from 0001.
1. Set the Select switch to CARD.
2. Press the MODE button to set Camera ( ).
3. Press the MENU button.
The menu list will appear.
4. Move the Joystick (▲ / ▼) up or down to select
"Memory", then press the Joystick.
5. Move the Joystick (▲ / ▼) up or down to select
"File No.", then press the Joystick.
6. Move the Joystick (▲ / ▼) up or down to select
the desired option "Series" or "Reset", then press
the Joystick.
7. To exit, press the MENU button.
When you set "File No." to "Series", each file is assigned
with a different number so as to avoid duplicating file names.
It is convenient when you want to manage your files on a PC.
•
•
•
•
BATT.
CHG
MODE TAPE CARD
Photo Quality � Super Fine
Move Select Exit MENU
M.Cam Mode
Memory
File No. � Series
Move Select Exit MENU
M.Cam Mode
File No.
Memory
✔ Series
Reset
设置文件编号 (FILE NO.( 文件编号 ))
文件编号仅支持在 M.Cam( 存储卡摄像 ) 模式下进
行设置。➥ 第 18 页
当文件被保存在存储卡上时，会按照拍摄顺序对文
件进行编号。
文件编号可以下列方式进行设定：
- "Series( 连续 )"：新的文件将会按顺序接着已
有的前一个文件的编号继续
命名。
- "Reset( 重置 )"：如果存储卡上尚未保存文件，
则从 0001 开始对文件进行编号。
1.切换存储介质为 CARD。
2.按下 MODE 按钮设置为 Camera( 摄像 ) 模式
( )。
3.按下 MENU 按钮。
屏幕上显示菜单列表。
4.向上或向下拨动操纵杆 (/) 选择 "Memory
( 存储卡设置 )"，然后按下操纵杆确认。
5.向上或向下拨动操纵杆 (/) 选择 "File No.
( 文件编号 )"，然后按下操纵杆确认。
6.向上或向下拨动操纵杆 (/) 选择 "Series
( 连续 )" 或 "Reset( 重置 )"，然后按下操纵杆确认。
7.若要退出菜单，请按下 MENU 按钮。
当您设置 "File No.( 文件编号 )" 为 "Series( 连续 )" 时，则每
个文件会被分配不同的编号，避免文件名重复。如果您想要在
电脑上管理这些文件，这样做就会非常方便。
•
•
•
•
SETTING THE FILE NUMBER (FILE NO.)