Samsung HT-H6500WM-ZA - Manual (Page 12)

12
- English
Connections
Connecting to a TV and External Devices
HDMI OUT
LAN
AUX IN FM ANT
OPTICAL
DIGITAL
AUDIO IN
L
R
HDMI IN
HDMI OUT HDMI IN AUDIO OUT OPTICAL OUT
HDMI OUT
LAN
POWER AUX IN FM ANT
OPTICAL DIGITAL AUDIO IN
L
R HDMI IN
SPEAKERS OUT
CENTER SUBWOOFER
FRONT L FRONT R IM PEDA NCE : 3 Ω
Method~1 Method~2 Method~3
R
Red
W
White
External~devices
Connecting~to~a~Tv
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI
IN jack on your TV. If the TV supports ARC, you can hear the audio from your TV through the home
theater with only this cable connected. See page 17 in this manual and the section on ARC in your
TV's user's manual for details.
Connecting~to~External~devices
~Method~1~~AUx~IN~:~Connecting~an~External~Analog~Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out
jack on the external analog component.  Select the AUx mode.
~ ~ Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
~Method~2~~OpTICAL~:~Connecting~an~External~digital~Audio~Component
Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes) to the home theater. Using a digital optical cable (not supplied), connect the
Optical Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device
using a digital optical cable.  Select the d.~IN mode.
~Method~3~~HdMI~IN~:~Connecting~to~an~External~Component~with~an~HdMI~Cable
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI
OUT jack on your digital device.  Select the HdMI~mode.
✎ To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
✎ This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
✎ This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
Selecting~an~External~device~to~Use
To select an external device after you have connected it, press the SOURCE button. Each time you press
the button, the mode changes in this order : Bd/dvd~;~d.~IN~;~AUx~;~HdMI~;~FM~;~BT