Samsung HT-H6500WM-ZA - Manual (Page 13)

13
- English
Connections
Connecting to a Network Router
You can connect your product to your network
router using one of the methods illustrated
below.
Wired~Network
Broadband~
service
Broadband~
service
Broadband~modem~
(with~integrated~router)
Broadband~
modem~
Router
Or
HDMI OUT
LAN
POWER AUX IN FM ANT
OPTICAL DIGITAL AUDIO IN
L
R HDMI IN
SPEAKERS OUT
CENTER SUBWOOFER
FRONT L FRONT R
IMPEDANCE : 3
Ω
✎ Your router or your Internet Service Provider's
policies may prevent the product from
accessing Samsung's software update server.
If this occurs, contact your Internet Service
Provider (ISP) for more information.
✎ DSL users, please use a router to make a
network connection.
✎ To use the DLNA function, you must connect
your PC to your network as shown in the
illustrations above.
The connection can be wired or wireless.
Wireless~Network
Broadband~
service
Wireless~Ip~sharer
✎ If your wireless IP router supports DHCP, this
product can use a DHCP or static IP address to
connect to the wireless network.
✎ Set your wireless IP router to Infrastructure
mode. Ad-hoc mode is not supported.
✎ The product supports only the following
wireless security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/
AES), WPA2-PSK (TKIP/AES)
✎ Select a channel on the wireless IP router that
is not currently being used. If the channel set
for the wireless IP router is currently being
used by another device nearby, it will result in
interference and communication failure.
✎ In compliance with the newest Wi-Fi
certification specifications, Samsung home
theaters do not support WEP, TKIP, or TKIP-
AES (WPS2 Mixed) security encryption in
networks running in the 802.11n mode.
✎ Wireless LAN, by its nature, may cause
interference, depending on the operating
conditions (AP performance, distance,
obstacles, interference by other radio devices,
etc).