Samsung HT-H6500WM-ZA - Manual (Page 23)

23
- English
Settings
2.~ Scroll the list down, select WpS(pBC), and
then press the Ok button.
3.~ Press the WpS(pBC) button on your
router within two minutes. Your product
automatically acquires all the network
settings values it needs and connects to your
network after the network connection is
verified.
4.~ When it is done, highlight Ok, and then
press the Ok button.
✎ For a WPS connection, set your wireless
router’s security encryption to AES. WEP
security encryption does not support a WPS
connection.
Wi-Fi Direct
The Wi-Fi~direct function allows you to connect
Wi-Fi~direct devices to the product and each other
using a peer-to-peer network, without a wireless
router.
✎ Some Wi-Fi~direct devices may not support
the AllShare function if connected via Wi-Fi~
direct. If this is the case, change the network
connection method you used to connect the
device to the home theater.
✎ Wi-Fi~direct transmissions can interfere
with Bluetooth signals. Before you use the
Bluetooth function, we strongly recommend
that you turn off the Wi-Fi~direct function on
any device in which it is currently on.
1.~ Turn on the Wi-Fi~direct device and activate
its Wi-Fi~direct function.
2.~ In the Home screen, select Settings, and then
press the Ok button.
3.~ Select Network, and then press the Ok
button.
4.~ Select Wi-Fi~direct, and then press the Ok
button.
The Wi-Fi~direct devices that you can connect
the home theater to appear.
Refresh
Wi-Fi~direct
device~Name~:~[HTS]H6500WM
Select~your~Wi-Fi~direct~device~to~connect~to.
AndroidXXXXXXX Disconnected
Close
Settings
5.~ You have three ways to complete the Wi-Fi
connection:
~ ~ Through the Wi-Fi device.
~ ~ Through the product using PBC.
~ ~ Through the product using a PIN.
Each is covered below.
Through~the~Wi-Fi~device
1.~ On the Wi-Fi device, follow the device's
procedure for connecting to another Wi-Fi~
direct device. See the device's user manual
for instructions.
2.~ When you have completed the procedure,
you should see a pop-up on your TV screen
saying that a device that supports Wi-Fi~
direct has requested to connect. Select Ok,
and then press the Ok button to accept.
3.~ The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi~
direct screen as connected.
~ ~ The PBC and PIN procedures connect devices
automatically.
Through~the~product~Using~pBC
1.~ Select the Wi-Fi~direct device you want to
connect to this product, and then press the
Ok button.
2.~ The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi~
direct screen as connected.
Through~the~product~Using~a~pIN
1.~ Select the Wi-Fi~direct device you want to
connect to this product, and then press the
Ok button.
2.~ The PIN pop-up appears.
3.~ Note the PIN code in the pop-up, and then
enter it into the appropriate field in the Wi-Fi~
direct device you want to connect.
4.~ The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi~
direct screen as connected.
✎ The current wired or wireless network
connection will be disconnected when you use
the Wi-Fi~direct function.