Samsung HT-H6500WM-ZA - Manual (Page 37)

37
- English
playing
~Content
To~connect~the~Home~Theater~to~a~Bluetooth
device
Connect
Bluetooth~device
Before you begin, confirm that the Bluetooth
device supports the Bluetooth compliant stereo
headset function.
1.~ Press the
SOURCE button on the remote
control to display the BT message.
2.~ Select the Bluetooth menu on the Bluetooth
device you want to connect. For instructions,
refer to the Bluetooth device's manual.
3.~ Select the Stereo headset menu on the
Bluetooth device.
~ ~ You will see a list of devices.
4.~ Select " [HTS]Hxxxxx " from the searched list.
~ ~ When the Home Theater is connected to
the Bluetooth device, the device name of
the connected Bluetooth device, followed
by the name of home theater will appear
on the front display of home theater.
5.~ Play music on the connected device.
~ ~ You can listen to the music playing on the
connected Bluetooth device over the Home
Theater system.
✎ The Home Theater only supports Middle
Quality SBC data (up to 237kbps@48kHz),
and does not support High Quality SBC data
([email protected]).
✎ The AVRCP feature is supported. It's
functionality will differ, depending on the
specifications of the connected device.
✎ Connect only to a Bluetooth device that
supports the A2DP Profile.
✎ Only one Bluetooth device can be paired at a
time.
✎ The search or connection functions may not
work properly in the following cases:
- If there a strong electric field near or around
the home theater.
- If several Bluetooth devices are simultaneously
paired with product.
- If the Bluetooth device is turned off, not in
place, or malfunctions.
- Note that such devices as microwave ovens,
wireless LAN adapters, fluorescent lights, and
gas stoves use the same frequency range as
the Bluetooth device, and can cause electric
interference.
✎ For a more reliable connection to a Bluetooth
device or to other devices such as a smart
phone, we recommend you update the
device's software to the most current version.
To~disconnect~the~Bluetooth~device~from~the
~Home~Theater
You can disconnect the Bluetooth device from
the Home Theater. For instructions, refer to the
Bluetooth device's manual.
~ ~ When the Home Theater is disconnected from
the Bluetooth device, the Home Theater will
display dISCONNECTEd on the front display.
To~disconnect~the~Home~Theater~from~the
Bluetooth~device
Press the ( ) button on the front panel of the
Home Theater to switch from BT to another mode
or turn off the Home Theater.
~ ~ Except when you disconnect the Home Theater
by changing functions, the connected Bluetooth
device will wait a certain time for a response
from the Home Theater before terminating the
connection. (Disconnection time may differ,
depending on the Bluetooth device.)
✎ In Bluetooth connection mode, the Bluetooth
connection will be lost if the distance between
the Home Theater System and the Bluetooth
device exceeds 32.8 feet. When the Bluetooth
device comes back into effective range or
you restart the Bluetooth device, you have
to pair the device and home theater again to
reconnect.