Samsung SC-D77-XAA - Manual (Page 25)

There are two types of power source that can be connected to your camcorder.
-
The AC Power Adapter and AC cord : used for indoor recording.
- The battery Pack : used for outdoor recording.
To use the AC Power adapter and DC Cable
1. Connect the AC Power adapter to the AC cord.
2. Connect the AC cord to a wall socket.
Note The plug and wall socket type may be different depending on
the country you’re in.
3. Connect the DC cable to the DC jack socket of the camcorder.
4. Set the camcorder to the CAMERA or PLAYER mode by holding down
the tab on the power switch and turning it to the CAMERA or PLAYER position.
To select the mode of CAMCORDER (SCD75/D77 only)
✤ If you want to use this unit as a camcorder, set the mode switch to
the CAMCORDER position.
✤ If you want to use this camcorder as a DSC (Digital Still Camera),
set the mode switch to the DSC position.
21
ENGLISH
Preparing
Connecting a Power Source
2
1
3
4-a
CAMERA
4-b
PLAYER
DSC CAMCORDER