Samsung SC-D77-XAA - Manual (Page 26)

ENGLISH
22
✤ The amount of continuous recording time available depends on :
-
The type and capacity of battery pack you are using.
- How much you use the Zoom function.
It is recommended that you have several batteries available.
Charging the Lithium Ion Battery Pack
1. Lift the viewfinder up and attach the battery pack to the camcorder.
2. Connect the AC Power adapter to an AC cord and connect the AC cord to a wall socket.
3. Connect the DC cable to the DC jack socket on the camcorder.
4. Turn the Camera power switch to off, the charging indicator will start to flash showing
that the battery is charging.
5. When it has finished charging, disconnect the battery and AC Power adapter from the camcorder.
- Even with the power switched off, the battery will still discharge if it is left connected to the camcoder.
Notes
■ The battery pack may be charged a little at the time of purchase.
■ To prevent reduction in the life and capacity of the battery pack, always remove it from the camcorder after it is fully charged.
To use the Lithium Ion Battery Pack
Using the Lithium Ion Battery Pack
Preparing
Blinking time Charging rate
Once in a second Less than 50%
Twice in a second 50% ~ 75%
Three times in a second 75% ~ 99%
Stays on steady Fully charged
On for a second and Error - Reset the battery and
off for a second DC cable.
2
1
3
4