Samsung SC-D77-XAA - Manual (Page 74)

ENGLISH
70
IEEE 1394 Data Transfer
● System requirements
■ CPU : faster Intel ® Pentium III TM 450Mhz compatible
■ Operating system : Windows ® 98SE, ME, Mac OS
■ Main memory : more than 64 MB RAM
■ IEEE1394 add-on card or built in IEEE1394 card
Recording with DV connecting cable
1. Set the power switch to PLAYER mode.
2. Connect the DV cable (not supplied) to the DV IN/OUT port of the camcorder and
to the DV IN/OUT port of the other DV device.
■ Make sure DV IN appears on the screen.
3. Press the START/STOP button to enter the REC PAUSE mode.
■ PAUSE is displayed in the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
■ If you want to pause recording for a while, press the START/STOP button again.
6. To stop recording, press the (STOP) button.
Note When making recordings on the camcorder, the picture on the LCD or a TV monitor may occasionally
be uneven. Recorded pictures are not affected.
6Pin 4Pin
(Not Supplied)
DV port linking diagram
(Not Supplied) IN/OUT