Samsung SC-D77-XAA - Manual (Page 30)

ENGLISH
26
Basic Recording
1. Connect a Power source. (see page 21)
(Battery pack or AC power adapter)
■ Insert a cassette. (see page 25)
2. Remove the LENS CAP and hook it onto the hand strap.
3. Set the power switch to the CAMERA position.
■ Set the mode switch to CAMCORDER position. (SCD75/D77 only)
■ Open the LCD monitor and make sure that STBY is displayed.
■ If the protection tab of the cassette is open, 'TAPE' will flash on the display.
■ Make sure the image you want to record appears in the LCD monitor or viewfinder.
■ Make sure the battery level indicates that there is enough remaining power for your
expected recording time.
4. To start recording, press the START/STOP button.
- REC is displayed in the LCD.
To stop recording, press the START/STOP button again.
-
STBY is displayed in the LCD.
Making your First Recording
1 2
4 3