Samsung SC-D77-XAA - Manual (Page 92)

ENGLISH
88
✤ At the end of a recording you must remove the power source.
✤ Leaving the battery pack on the camcorder after completing recording will reduce battery life.
After completing a recording session
1. Slide the EJECT switch in the direction of the arrow
■ Opening the cassette door ejects the tape automatically.
■ Wait until the tape is completely ejected.
2. After removing the tape, close the door and store the camcorder in a dust free environment.
■ Dust and other foreign materials can cause image degradation.
3. Set the power switch to OFF mode.
4. Disconnect the power source or remove the Lithium Ion Battery Pack.
■ When connecting a power supply, separate it in reverse order by referring to page 21.
■ Hold down the BATT. RELEASE button and slide the battery pack in the direction of the arrow.
Maintenance
After finishing a recording
3
4 4
1
2
OFF