Avaya 4610SW - Manual (Page 67)

Backup/Restore Options
Issue 3 April 2006 67
2. Choose one of the following options:
If you want to Then
Add or update
the Server IP
Address. Press a Line/Feature button on the row immediately under Server
IP Address/Directory Path.
The FTP Server Address Input screen displays. The top display
area prompts “Enter IP address” (if no server name is currently
assigned) or “IP Address or DNS name (<17)” (if you are
modifying an existing server address).
Use the dialpad and any applicable Line/Feature buttons to enter
the 16 character or fewer server address/name. (See
Entering
Characters Using the Dialpad and Editing During or After Entry in
Chapter 3: Using the Speed Dial Application for information about
data entry.) Select Save to save the setting and return to the first
FTP Settings Main screen.
Add or update
the directory
path (to which
backup saves
your data). Press a Line/Feature button on the bottom row under Server IP
Address/Directory Path.
The FTP Directory Path Input screen displays. The top display
area prompts “FTP Directory Path (<23).”
Use the dialpad and any applicable Line/Feature buttons to enter
the path provided by your System Administrator (22 or fewer
characters). (See
Entering Characters Using the Dialpad and
Editing During or After Entry in Chapter 3: Using the Speed Dial
Application for information about data entry.) Select Save to save
the setting and return to the first FTP Settings Main screen.
Alternately, you can select Clear to remove the current path prior
to entering a new path. Or you can select Cancel to return to the
Backup/Restore Main screen without changing the current path.
Add or update
the [Server]
User Name. Press the Right Page or Left Page button to display the second
FTP Settings Main screen. Select User Name.
The FTP User Name Input screen displays. The top display area
prompts “FTP User Name (<16).”
Use the dialpad and any applicable Line/Feature buttons to enter
the User Name (15 or fewer characters) that gives you access to
the server. (Either your System Administrator provides the name
or you select the name using parameters provided by the
administrator.) (See
Entering Characters Using the Dialpad and
Editing During or After Entry in Chapter 3: Using the Speed Dial
Application for information about data entry.)
Select Save to save the setting and return to the first FTP Settings
Main screen.
1 of 2