Allied Telesis AT-DC2552XS - Manual (Page 193)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 193
SHOW SNMP-SERVER
Syntax
show snmp-server
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the current status of the SNMP agent on the
switch. See Figure 35 for an example.
Figure 35. SHOW SNMP-SERVER Command
The fields are described in Table 28.
SNMP Server ....... Enabled
IP Protocol ....... IPv4
SNMPv3 Engine ID (Configured) ........ Not set
SNMPv3 Engine ID (actual) ............ 0x80001f8880793499cd7bdba40e
Table 28. SHOW SNMP-SERVER Command
Field Description
SNMP Server Indicates whether the SNMP agent on
the switch is enabled or disabled.
IP Protocol Displays the IP protocol that the
switch supports. The switch currently
supports only IPv4.
SNMPv3 Engine ID
<Configured> Displays the SNMPv3 engine ID that
you set with the SNMP-SERVER
ENGINEID LOCAL command.
SNMPv3 Engine ID <Actual> Displays the SNMPv3 engine ID that
the switch is currently using.