Hostname – Allied Telesis AT-DC2552XS User Manual
Page 96
Chapter 4: Basic Switch Operations Commands
96
HOSTNAME
Syntax
hostname
hostname
Parameter
hostname
Specifies a name of up to 39 alphanumeric characters for the
switch. A host name can contain special characters except spaces,
exclamation marks (!), question marks (?), apostrophes (‘), and
double quotation marks (“).
Mode
Global Configuration mode
Description
Use this command to assign the switch a name. The switch displays the
name in the command line prompt, in place of the default “awplus.”
When you issue this command, the host name is set to the Management
Information Base (MIB)-II “sysName” for SNMP. By default, the sysName
has no value.
Example
This example assigns the name “Switch1” to the switch:
awplus> enable
awplus# configure terminal
awplus(config)# hostname Switch1
Switch1(config)#