Table 45. show platform port counters command – Allied Telesis AT-DC2552XS User Manual
Page 271
AT-DC2552SX Switch Command Line Interface User’s Guide
271
Table 45. SHOW PLATFORM PORT COUNTERS Command
Parameter
Description
Combined receive/transmit packets by size (octets) counters:
64
65- 1 27
128 - 255
256 - 511
512 - 1023
1024 - MaxPktSz
1519 - 1522
1519 - 2047
2048 - 4095
4096 - 9216
Displays the numbers of frames transmitted and
received by the port, grouped by frame size.
General counters: Receive
Octets
Displays the number of received octets.
Pkts
Displays the number received packets.
CRCErrors
Displays the number of ingress frames with a
Cyclic Redundancy Check (CRC) error.
FCSErrors
Displays the number of ingress frames that had
Frame Check Sequence (FCS) errors.
MulticastPkts
Displays the number of received multicast
frames.
BroadcastPkts
Displays the number of received broadcast
frames.
PauseMACCtlFrms
Displays the number of received PAUSE
packets when flow control is enabled.
OversizePkts
Displays the number of received frames that
exceeded the maximum size (1518 octets).
Fragments
Displays the number of ingress undersized
frames, which are less than 64 octets and have
FCS errors, including alignment errors.
Jabbers
Displays the number of ingress jabber frames,
which are larger than 1518 octets and have FCS
errors, including alignment errors.
UnsupportOpcode
Displays the number of unsupported MAC
Control frames (MAC Control frames except
PAUSE frames).