Allied Telesis AT-DC2552XS - Manual (Page 229)

229
Chapter 10
NTP Client Commands
The NTP commands are summarized in Table 36.
Table 36. Simple Network Time Protocol Commands
Command Mode Description
“CLOCK TIMEZONE” on page 230 Global
Configuration Sets the UTC offset value, the time
difference in hours and minutes
between local time and Coordinated
Universal Time (UTC).
“NO NTP PEER” on page 231 Global
Configuration Disables the NTP client.
“NTP PEER” on page 232 Global
Configuration Specifies the IP address of the NTP
server where the switch obtains the
date and time.
“PURGE NTP” on page 233 Global
Configuration Restores the default settings to the
NTP client.
“SHOW NTP ASSOCIATIONS” on
page 234 Privilege Exec Displays the settings of the NTP client
on the switch.
“SHOW NTP STATUS” on page 236 Privilege Exec Displays whether the switch has
synchronized its time with the
specified NTP server.