Allied Telesis AT-DC2552XS - Manual (Page 216)

Chapter 9: RMON Commands
216 Section I: Switch Management
NO RMON ALARM
Syntax
no rmon alarm alarm_id
Parameter
alarm_id
Specifies the ID number of an alarm to delete. The range is 1 to
65,535.
Mode
Global Configuration mode
Description
Use this command to delete an alarm from the switch.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 116
Example
This example deletes the alarm with an ID of 2:
awplus> enable
awplus# configure terminal
awplus(config)# no rmon event 2