Spanning-tree mst instance – Allied Telesis AT-S83 User Manual
Page 192
Advertising
Chapter 9: Interface Configuration Mode Commands
192
SPANNING-TREE MST INSTANCE
Syntax
spanning-tree mst instance <1-15>
Parameters
instance
Specifies the MSTP instance. Choose an ID from 1 to 15.
Description
Use the SPANNING-TREE MST INSTANCE command to associate the
interface to the bridge.
Command Mode
Interface mode
Example
The following commands associates interface 3 with the bridge:
switch#configure terminal
switch(config)#interface xe3
switch(config-if)#spanning-tree mst instance 9
Related Commands
none
Advertising