Undebug rip – Allied Telesis AT-S83 User Manual
Page 99
Advertising
AT-S83 Management Software Command Line Interface User’s Guide
99
UNDEBUG RIP
Syntax
undebug rip all|events|nsm|packet
Parameters
rip
Indicates the Routing Information Protocol. Choose from the
following:
all
Indicates all of the RIP debugging parameters.
events
Indicates RIP events.
nsm
Indicates NSM information.
packet
Indicates RIP packets.
Description
Use this command to disable debugging for RIP parameters.
Command Modes
View and Privileged Executive modes
Examples
The following command disables debugging of RIP events:
switch#undebug rip events
The following command disables debugging of RIP packets:
switch#undebug rip packets
Related Commands
none
Advertising