Allied Telesis AT-S83 - Manual (Page 76)

Chapter 5: Privileged Executive Mode Commands
76
PING IP
Syntax
ping ip WORD
Parameters
WORD Specifies the hostname or an IP address in the
following format:
xxx.xxx.xxx.xxx
Description
This command instructs the switch to ping an end node. You can use this
command to determine whether an active link exists between the switch
and another network device.
Command Mode
Privileged Executive mode
Example
The following command pings an end node with the IP address of
142.245.22.22:
switch#ping ip 142.245.22.22
The results of the ping are displayed on the screen.
Related Commands
none