Allied Telesis AT-S83 - Manual (Page 46)

Chapter 4: View Mode Commands
46
CLEAR ARP-CACHE
Syntax
clear arp-cache
Parameters
none
Description
Use the CLEAR ARP-CACHE command to clear all of the dynamically
learned IP addresses of network devices and their corresponding MAC
addresses from the Address Resolution Protocol (ARP) cache.
Note
To delete the static ARP entries, use the NO ARP command.
Command Mode
View and Privileged Executive modes
Examples
The following command clears the ARP cache:
switch#clear arp-cache
Related Commands
“ARP” on page 109