Show interface vlan – Allied Telesis AT-S83 User Manual
Page 360
Chapter 17: VLAN Commands
360
SHOW INTERFACE VLAN
Syntax
show interface VLANID
Parameters
VLANID
Specifies the number of a VLAN. All of the interfaces are
members of VLAN1 which is the default VLAN.
Description
Use this command to display information about a particular VLAN by
specifying the VLAN ID.
Command Mode
Privileged Executive mode
Example
The following example displays the command and its resulting output:
switch# show interface vlan1
Interface vlan1
Scope: both
Hardware is VLAN, address is 0004.2104.0802 (bia
0004.2104.0802)
index 5 metric 1 mtu 1500 duplex-half arp ageing
timeout 600
speed 10000M
<UP,BROADCAST,RUNNING,MULTICAST>
VRF Binding: Not bound
DHCP client is disabled
inet 11.1.1.2/8 broadcast 11.255.255.255
inet6 fe80::210:3ff:fe56:3c03/64
input packets 01, bytes 0154, dropped 00, multicast
packets 0231
output packets 0231, bytes 015518, multicast packets
0231 broadcast packets 01
Related Commands