Allied Telesis AT-S83 - Manual (Page 357)

AT-S83 Management Software Command Line Interface User’s Guide
357
LINE CONSOLE
Syntax
line console 0
Parameters
console Specifies the primary terminal line. Choose from the
following options:
0 Indicates the first line number.
Description
The LINE CONSOLE command sets the primary terminal line. After you
enter this command, the prompt changes to indicate the Line mode.
Command Mode
Configuration Terminal mode
Example
The following commands set the first line of the console to 0:
switch#configure terminal
switch(config)#line console 0
switch(config-line)#
Related Commands
none