Nikon 400mm-f28G-ED-AF-S-VR-Nikkor - Manual (Page 24)

24
En
5. To limit the range of autofocus
(See page 20 for usable cameras.)
• With AF operation, if the subject is always more than 6m
(19.7 ft.) away, set the focusing limit switch (Fig. 2) to
“
∞–6m” to reduce focusing time.
• If the subject is sometimes 6m (19.7 ft.) or closer, set it to
“FULL”.
• This function is only compatible with autofocus.
6. AF-L/MEMORY RECALL/AF-ON
˾ Focus operation selection switch (AF-L/MEMORY RECALL/
AF-ON) and Focus operation button
• Depending on the position of the Focus operation selection
switch (Fig. 3), the function of the Focus operation button
(Fig. 4) varies.
• The position of the Focus operation buttons can be changed to
suit your preference. For more details on this change, contact
your nearest Nikon service center or representative office.
• Press one of four Focus operation buttons to activate each
function.
˾ Using the Focus lock button (See page 20 for usable cameras.)
1 Set the Focus mode switch to “A/M“ or “M/A“. (Fig. 1)
• This function is only compatible with autofocus.
2 Set the Focus operation selection switch (Fig. 3) to “AF-L“.
3 During autofocus, the focus can be locked while you are pressing the Focus
operation button. (Fig. 4)
• Focus is locked while either of these buttons is pressed.
• The Focus Lock function can be engaged on either the camera and lens.
˾ MEMORY RECALL (See page 20 for usable cameras. Available during
autofocus and manual focus.)
• Set the sound monitor switch (Fig. 5) to “ “ to activate the
sound monitor; set it to “ “ to cancel.
• The following operation is with the sound monitor activated.
Fig. 3
Fig. 4
Position of Focus operation
selection switch
Function of Focus
operation button
AF-L Focus lock
MEMORY RECALL Memory recall
AF-ON AF start (AF-ON) on the lens
Fig. 5
Fig. 2