Nikon 400mm-f28G-ED-AF-S-VR-Nikkor - Manual (Page 29)

29
En
• For F5 cameras, only EC-B, EC-E, B, E, J, A, L focusing screens are usable in
Matrix Metering.
• When using the B and E focusing screens in cameras other than those listed
above, refer to the columns for the B and E screens.
14. Lens care
• Clean the lens surfaces with a blower brush. To remove dirt and smudges, use
a soft, clean cotton cloth or lens tissue moistened with ethanol (alcohol) or
lens cleaner. Wipe in a circular motion from center to outer edge, taking care
not to leave traces or touch other parts of the lens.
• Never use thinner or benzene to clean the lens as this might damage it, result
in a fire, or cause health problems.
• When the lens is not in use, attach the lens cap to protect the front lens
element.
• When storing the lens in its lens case, attach both front and rear caps.
• When the lens will not be used for a long time, store it in a cool, dry place to
prevent mold. Also store the lens away from direct sunlight or chemicals such
as camphor or naphthalene.
• Do not get water on the lens or drop it in water as this will cause it to rust and
malfunction.
• Reinforced plastic is used for certain parts of the lens. To avoid damage, never
leave the lens in an excessively hot place.
15. Supplied accessories
• Heavy duty case CT-404 • Slip-on front lens cap • Rear lens cap • Lens hood
HK-33 • Dedicated filter holder* • 52mm screw-in NC filter • Strap LN-1
• Monopod collar
* If dedicated accessories are broken or missing, contact your nearest Nikon
service center or representative office as they are not available at general
shops.
16. Optional accessories
• Semi-soft case CL-L2 • 52mm screw-in filters (except circular polarizing filter II)
• Slip-in circular polarizing filter C-PL1L • AF-S Teleconverters (TC-14EII/
TC-17EII/TC-20EIII)