Subscribe to a basestation, Connect a headset, Placing and cleaning of the device – Auerswald 800 User Manual
Page 11
Introduction
11
Subscribe to a Basestation
Before you can make a call, the handset has to be subscribed to a basestation and con-
figured with the configuration program of the PBX. This is described in detail in the man-
ual of the basestation.
☞
If the telephone is subscribed and in range you
will see on the left side of the display the sign:
e
.
Connect a Headset
To connect a Headset (e.g. the GN Netcom
M2520) to the handset, plug the plug of the
headset into the jack at the bottom (
☞
To accept a call when you can´t use your hands
at the moment, you can activate the automatic
call acception (see
Placing and Cleaning of the Device
Put the charger on a non slippery pad. It might be possible that some plastics or colors
used on furniture are aggressive to the device feet. This chemical reaction might cause
damage to the surface of your furniture. The manufacturer is not taking any responsibility
for this kind of damage.
pic. 6