Nikon S6400 User Manual
Page 161
E
37
Refe
B
Notes About Connecting the HDMI Cable
An HDMI cable is not included. Use a commercially available HDMI cable to connect the camera to a
high-definition TV. The output terminal on this camera is an HDMI mini connector (type C). When
purchasing an HDMI cable, be sure that the device end of the cable is an HDMI mini connector.
B
Notes About Connecting the Cable
• When connecting the cable, be sure that the plug is properly oriented. Do not force the plug into
the camera. When disconnecting the cable, do not pull the plug at an angle.
• Do not connect cables to the HDMI mini connector (Type C) and to the USB/audio/video output
connector simultaneously.
B
If Images Are Not Displayed on the TV
Be sure that the camera’s video mode setting in the TV settings (
E105) under the setup menu
conforms to the standard used by your TV.
C
Using a TV Remote Control (HDMI Device Control)
The remote control of an HDMI-CEC-compatible TV can be used to control playback.
It can be used instead of the camera’s touch panel to select images, start and pause movie playback,
scroll playback of images taken using easy panorama, and switch between full-screen playback
mode and six-image thumbnail display, etc.
• Set the HDMI device control setting (
E105) of TV settings to On (default setting) and then
connect the camera and TV using an HDMI cable.
• Aim the remote control at the TV when operating it.
• Refer to the TV’s operating instructions for information about the TV’s HDMI-CEC compatibility.