Nikon S6400 - Manual (Page 65)

47
Sh
oot
in
g
F
e
at
ures
A Draw
• Write a memo or draw a picture on the touch panel display and save it as an image.
• The image is saved at an image mode setting of l (640×480).
See “Using the Draw Option” (
E2) for more information.
o Backlighting
• The camera focuses on the area in the center of the frame. The focus area can be changed using
the touch shutter or touch AF/AE ( A69).
• Tap F and tap
Y HDR to enable or disable the high dynamic range (HDR) function to suit the
type of picture you want to take.
• p Off (default setting): The flash fires to prevent the subject from being hidden in shadow.
- When the shutter-release button is pressed all the way down, one image is captured.
•
o On: Use when taking pictures with very bright and dark areas in the same frame.
- Digital zoom cannot be used.
- When the shutter-release button is pressed all the way, the camera shoots images
continuously at high speed, and saves the following two images.
- A non-HDR composite image
- An HDR composite image in which the loss of details in highlights or shadows is minimized
- The second image saved is an HDR composite image. If there is only enough memory to save
one image, an image processed by D-Lighting ( A84) at the time of shooting, in which dark
areas of the image are corrected, is the only image saved.
- Once the shutter-release button is pressed all the way, hold the camera still until a still image is
displayed. After taking a picture, do not turn the camera off before the monitor switches to the
shooting screen.
- The angle of view (i.e., the area visible in the frame) seen in the saved image will be narrower
than that seen in the monitor at the time of shooting.