Nikon S6400 User Manual
Page 184
E
60
Refe
B
Notes About Continuous Shooting
• When a setting other than Single is selected, flash cannot be used. Focus, exposure, and white
balance are fixed at the values determined with the first image in each series.
• It may take some time to save the images after shooting. The amount of time it takes to finish
saving the images depends on the number of images, image mode, the write speed of the
memory card, etc.
• When ISO sensitivity increases, noise may appear in captured images.
• The frame rate with continuous shooting may vary depending upon the current image mode
setting, the memory card used, or shooting condition.
• When Continuous is set to Pre-shooting cache, Continuous H: 120 fps, Continuous H:
60 fps, or Multi-shot 16, banding or variance in brightness or hue may occur in images that were
captured under lighting that flickers at high speeds, such as fluorescent, mercury-vapor, or
sodium-vapor lighting.
• Some settings cannot be used with other functions (
A71).
B
Notes About BSS
BSS is suited for shooting stationary subjects. BSS may not produce the desired results if the subject
moves or the composition changes.
D BSS
(Best Shot Selector)
The “Best Shot Selector” is recommended when shooting with the
flash off or the camera zoomed in, or in other situations in which
inadvertent motion can result in blurred images. When BSS is on, the
camera takes up to ten pictures while the shutter-release button is
held down. The sharpest image in the series is automatically selected
and saved.
W Multi-shot 16
Each time the shutter-release button is pressed,
the camera takes 16 shots at a rate of about 30
fps and arranges them in a single image.
• Image mode is fixed at L (image size: 2560
× 1920 pixels).
• Digital zoom cannot be used.
Option
Description