Nikon S6400 - Manual (Page 48)

30
Th
e
B
a
sics of
S
h
oot
in
g
an
d Play
back
Step 4 Focus and Shoot
1
Press the shutter-release button
halfway (
A31).
• When the subject is in focus, the focus area
indicator in the center of the frame glows green.
You can change the focus mode setting to
Target finding AF (
A74), which allows the
camera to detect the main subject and focuses
on that subject.
• When you are using digital zoom, the camera
focuses on the subject in the center of the frame
and the focus area is not displayed. When the
camera has focused, the focus indicator (
A6)
glows green.
• While the shutter-release button is pressed
halfway, the focus area or focus indicator may
flash red. This indicates that the camera is unable to focus. Modify the composition and
press the shutter-release button halfway again.
2
Press the shutter-release button the rest of
the way down (
A31).
• The shutter is released and the image will be saved to the
memory card or internal memory.
3
To apply an effect to the captured image, tap OK.
• The screen for selecting an effect is displayed.
See “Using Quick Effects” ( A39) for more
information.
• When you tap Cancel or when no operations are
performed for about five seconds, the monitor
display returns to the shooting screen.
• To not display the screen shown on the right, set
Quick effects to Off ( A69).
1/ 1/ 1/ F3.1 F3.1 F3.1 250 250 250
OK Cancel
Quick effects