Tap measure to measure a new white balance value – Nikon S6400 User Manual
Page 188
E
64
Refe
4
Frame the white or gray reference
object in the measuring window.
• To apply the most recently measured value for
preset manual instead of taking a new
measurement, tap Cancel. The most recently
measured value is set for white balance, and a
new measurement is not performed.
5
Tap Measure to measure a new white
balance value.
• The shutter is released and the new white
balance value for preset manual is set. No image
is saved.
• When the monitor display returns to the screen
shown in step 3, tap
f to complete the setting.
B
Notes About White Balance
• Some settings cannot be used with other functions (
A71).
• Set the flash to W (off) when white balance is set to any setting other than Auto and Flash
(
B
Notes About Preset Manual
A value for flash lighting cannot be measured with Preset manual. When shooting using the flash,
set White balance to Auto or Flash.
Preset manual
Cancel
Measure
Measuring window
Preset manual
Cancel
Measure