Nikon D3S - Manual (Page 170)

144
Z
❚❚Canceling Bracketing
To cancel bracketing, press the D button and rotate the main
command dial until the number of shots in the bracketing
sequence is zero (r) and W is no longer displayed. The
program last in effect will be restored the next time bracketing is
activated. Bracketing can also be cancelled by performing a two-
button reset (
0 200), although in this case the bracketing
program will not be restored the next time bracketing is activated.
A
White Balance Bracketing
White balance bracketing is not available at an image quality of NEF
(RAW). Selecting NEF (RAW), NEF (RAW)+JPEG fine, NEF (RAW)+JPEG
normal, or NEF (RAW)+JPEG basic cancels white balance bracketing.
White balance bracketing affects only color temperature (the amber-
blue axis in the white balance fine-tuning display,
0 154). No
adjustments are made on the green-magenta axis.
In self-timer mode ( 0 106), the number of copies specified in the white-
balance program will be created each time the shutter is released.
If the camera is turned off while the memory card access lamp is lit, the
camera will power off only after all photographs in the sequence have
been recorded.