Nikon D3S - Manual (Page 371)

345
U
This option is used to correct “red-eye”
caused by the flash and is available only with
photographs taken using a flash. The
photograph selected for red-eye correction is
previewed as shown at right. Confirm the
effects of red-eye correction and create a
copy as described in the following table. Note that red-eye
correction may not always produce the expected results and may
in very rare circumstances be applied to portions of the image that
are not affected by red-eye; check the preview thoroughly before
proceeding.
Red-Eye Correction
G button
➜ N retouch menu
To Use Description
Zoom in
N +
Press N button
and rotate main
command dial right
to zoom in, left to
zoom out. While
photo is zoomed in,
press
N and use
multi selector to view areas of image not
visible in monitor. Keep multi selector
pressed to scroll rapidly to other areas of
frame. While
N button is pressed, area
currently visible in monitor is indicated by
yellow border. Press
J to cancel zoom.
Zoom out
N +
View other
areas of
image
N +
Cancel zoom
J
Create copy
J
If the camera detects red-eye in the
selected photograph, a copy will be created
that has been processed to reduce its
effects. No copy will be created if the
camera is unable to detect red-eye.