Nikon D3S - Manual (Page 393)

367
n
9 When focusing at minimum focus distance with AF 80–200mm f/2.8, AF 35–
70mm f/2.8, AF 28–85mm f/3.5–4.5 <New>, or AF 28–85mm f/3.5–4.5 lens at
maximum zoom, in-focus indicator may be displayed when image on matte
screen in viewfinder is not in focus. Adjust focus manually until image in
viewfinder is in focus.
10 With maximum aperture of f/5.6 or faster.
11 Some lenses can not be used (see page 369).
12 Range of rotation for AI 80–200mm f/2.8 ED tripod mount is limited by camera
body. Filters can not be exchanged while AI 200–400mm f/4 ED is mounted on
camera.
13 If maximum aperture is specified using Non-CPU lens data ( 0 214), aperture
value will be displayed in viewfinder and top control panel.
14 Can be used only if lens focal length and maximum aperture are specified using
Non-CPU lens data ( 0 214). Use spot or center-weighted metering if desired
results are not achieved.
15 For improved precision, specify lens focal length and maximum aperture using
Non-CPU lens data ( 0 214).
16 Can be used in manual exposure modes at shutter speeds slower than flash
sync speed by one step or more.
17 Exposure determined by presetting lens aperture. In aperture-priority auto
exposure mode, preset aperture using lens aperture ring before performing AE
lock and shifting lens. In manual exposure mode, preset aperture using lens
aperture ring and determine exposure before shifting lens.
18 Exposure compensation required when used with AI 28–85mm f/3.5–4.5, AI 35–
105mm f/3.5–4.5, AI 35–135mm f/3.5–4.5, or AF-S 80–200mm f/2.8D. See
teleconverter manual for details.
19 Requires PK-12 or PK-13 auto extension ring. PB-6D may be required
depending on camera orientation.
20 Use preset aperture. In aperture-priority auto exposure mode, set aperture
using focusing attachment before determining exposure and taking
photograph.
• PF-4 Reprocopy Outfit requires PA-4 Camera Holder.