Connecting to a computer – Nikon D3S User Manual

Page 280

Advertising
background image

254

Q

Connecting to a Computer

This section describes how to use the supplied UC-E4 USB cable to
connect the camera to a computer. Before connecting the camera,
install Nikon Transfer and ViewNX from the supplied Software
Suite CD (see the Software Installation Guide for more information).
Nikon Transfer starts automatically when the camera is connected
and is used to copy photographs to the computer, where they can
be viewed using ViewNX (Nikon Transfer can also be used to back
up photographs and embed information in photographs as they
are transferred, while ViewNX can be used to sort photographs,
convert images to different file formats, process NEF/RAW
photographs, and modify NEF/RAW, TIFF, and JPEG images). To
ensure that data transfer is not interrupted, be sure the camera
battery is fully charged. If in doubt, charge the battery before use
or use an EH-6 AC adapter (available separately).

❚❚Supported Operating Systems

The supplied software can be used with computers running the
following operating systems:
Windows: Windows Vista Service Pack 2 (Home Basic/

Home Premium/Business/Enterprise/Ultimate; runs in 32-bit
emulation mode under 64-bit versions) and Windows XP Service
Pack 3 (Home Edition/Professional)

Macintosh: Mac OS X (version 10.3.9, 10.4.11, or 10.5.7)
See the websites listed on page xxiv for the latest information on
supported operating systems.

D

Connecting Cables

Be sure the camera is off when connecting or disconnecting interface
cables. Do not use force or attempt to insert the connectors at an angle.

Advertising