Nikon D3S - Manual (Page 339)

313
U
This option determines which settings are affected when AE &
flash or AE only is selected for Custom Setting e4 in manual
exposure mode.
Flash bracketing is performed only with i-TTL or AA flash control. If
a setting other than Flash only is selected and the flash is not used,
ISO sensitivity will be fixed at the value for the first shot, regardless
of the setting selected for ISO sensitivity auto control (
0 112).
At the default setting of MTR>under>over ( H), exposure, flash,
and white balance bracketing are performed in the order
described on pages 138 and 142. If Under>MTR>over (
I) is
selected, shooting will proceed in order from the lowest to the
highest value. This setting has no effect on ADL bracketing.
e5: Auto Bracketing (Mode M)
G button
➜ A Custom Settings menu
Option Description
F
Flash/speed
Camera varies shutter speed (Custom Setting e4
set to AE only) or shutter speed and flash level
(Custom Setting e4 set to AE & flash).
G
Flash/speed/
aperture
Camera varies shutter speed and aperture (Custom
Setting e4 set to AE only) or shutter speed,
aperture, and flash level (Custom Setting e4 set to
AE & flash).
H
Flash/aperture
Camera varies aperture (Custom Setting e4 set to
AE only) or aperture and flash level (Custom
Setting e4 set to AE & flash).
I
Flash only
Camera varies flash level only (Custom Setting e4
set to AE & flash).
e6: Bracketing Order
G button
➜ A Custom Settings menu