Nikon D3S - Manual (Page 343)

317
U
Note that none of these options can be combined with
Fn button + command dials > Dynamic AF area; see page 319.
t
Bracketing
burst
If the Fn button is pressed while exposure, flash, or
ADL bracketing is active in single frame or quiet
shutter-release mode, all shots in the current
bracketing program will be taken each time the
shutter-release button is pressed. If white balance
bracketing is active or continuous release mode
(mode C
H
or C
L
) is selected, the camera will repeat the
bracketing burst while the shutter-release button is
held down (in single frame release mode,
photographs will be taken at about 8 fps).
L
Matrix
metering Matrix metering is activated while the Fn button is
pressed.
M
Center-
weighted
metering
Center-weighted metering is activated while the Fn
button is pressed.
N
Spot
metering Spot metering is activated while the Fn button is
pressed.
m
Virtual
horizon
*
The exposure indicators act as a tilt meter ( 0 318).
Press the Fn button to toggle between exposure and
tilt meter displays.
K
Playback *
Fn button performs same function as K button.
Select when using a telephoto lens or in other
circumstances in which it is difficult to operate the
K
button with your left hand.
O
Access top
item in MY
MENU
*
Press the Fn button to jump to the top item in “MY
MENU.” Select this option for quick access to a
frequently-used menu item.
None
No operation is performed when the Fn button is
pressed.
* This option can not be used in combination with Fn button + command
dials ( 0 318). Selecting this option displays a message and sets
Fn button + command dials to None. If another option is selected for
Fn button + command dials while this setting is active, Fn button press
will be set to None.
Option Description